In people's daily life, washing machines are commonly used electrical appliances. Today's washing machines are basically fully automatic. The fully automatic washing machine reduces many washing steps for people. It is also very convenient to use. What are the specific operation steps of the fully automatic washing machine?

2. Pull open the washing box on the left and place the laundry detergent or washing powder in the designated compartment. Generally, there are washing areas, rinsing areas and soaking areas. Users should put laundry detergent and washing powder in the washing area. If you want to use a softener, you can place the softener in the rinsing area. Close the washing box after putting it away.

3. Then close the drum cover and click on the program. For summer clothes, you can choose the quick wash in the program, which lasts for 15 minutes. If it is winter clothes, users can choose the standard mode. Standard mode washing usually takes 40-46 minutes. If you wash down jackets or thicker clothes in the standard mode, you will wash them cleaner. Quick washing is not suitable for winter use. Quick washing is only suitable for thinner clothes. After the program is set, click Start.

4. After washing clothes, an alarm will sound. When the user hears this sound, he holds the buckle beside the roller and pulls it out. Just take out the clothes after opening the roller.

In the process of washing clothes, users should pay attention to the following aspects.

1. When "Washing" or "Rinsing" is selected, the drum will not operate until the selected water level is reached.

2. Never wash or dehydrate clothes containing volatile substances (solvents, alcohol, etc.). This is to avoid accidents.

3. When dehydration is unbalanced, the full-automatic washing machine can correct dehydration imbalance. If it has not been solved after two corrections, the washing machine will stop. At this time, the cover should be opened and the clothes squeezed to one side should be put evenly. Close the cover again and press the "Start/Pause" button.

4. When hot water is used for washing, the water temperature should not exceed 50 ℃. At the same time, water splashing and wetting the control panel should be avoided.

The completion of washing clothes does not mean the completion of the process of the full-automatic washing machine. After the washing machine completes its work, the user should turn off the power switch of the washing machine. Turn off the faucet and remove the drain at the same time. Drain the water out of the washing machine. Remove the grounding wire and unplug the power plug from the power socket.

Then wipe the body clean with a soft cloth. Do not use alcohol to wipe. You should avoid damage to the body surface. And after each washing, the filter and filter screen in the washing machine are cleaned. Keep the water flowing smoothly. There are also various parts on the control panel, which cannot be cleaned directly with water. You should avoid electric shock accidents caused by water flowing into the original electrical appliances.